The dental technology student’s bench kit: what to own for the lab

The dental technology student’s bench kit: what to own for the lab

Quick answer: Own the tools you use every session and that wear to your hand: a double-ended wax carving set, a wax caliper, and, if your course expects it, a spirit lamp, a saw frame and plaster shears. Leave large equipment, consumables and specialist items to the department, and check your course kit list before buying anything.

Dental technicians must be registered with the General Dental Council to work, and the route there runs through a training course and a great many hours at a laboratory bench. Courses issue kit lists, but the lists rarely explain what each item is for or which ones are worth buying well. This guide covers the hand instruments that make up a personal bench kit. It is the technician’s counterpart to our dental student kit guide, which is written for clinical students.

1. Check the course list first

Every course is different, and some supply kits or specify particular patterns. Read your list carefully before buying, and ask if anything is unclear. Where the list names a pattern, buy that pattern; where it simply says “wax carvers” or “lab instruments”, the guidance below will help you choose.

It is also worth asking second- and third-year students what they actually use. Kit lists are written to cover every eventuality, and some items on them sit in a drawer for the whole course. Buy the everyday tools first, well, and add the occasional ones when a module calls for them. Buying in one order also makes it easier to clear the free-delivery threshold.

2. Wax carving instruments

Wax work is where most early marks come from, and shared carvers are usually blunt and bent. A personal set is the single most useful purchase. Our sixteen-piece double-ended wax carving set gives 32 working ends (spatulas, points, scoops, blades and carvers) on all-stainless instruments with knurled grips. That range means you can try the profiles your tutors use and find the ones that suit your hand. If you prefer a smaller set to start, the wider wax carving and lab modelling collection has sets from four pieces upwards. Named patterns such as Le Cron, PKT and Zahle are explained in our wax carving starter guide.

3. Measuring wax thickness

A wax-up has to be the right thickness, and guessing is how castings fail. The spring wax caliper measures from 1 to 10 mm on an etched metric scale in 0.5 mm steps. Its spring arm keeps the measuring pressure constant, so readings are consistent from one check to the next. It is small, inexpensive and used constantly once you have one.

4. A heat source

Many wax techniques need a small, controllable flame to warm instruments and wax. Labs often provide burners, but a personal lamp is useful where benches are shared. The alcohol spirit lamp is polished stainless steel, runs on methylated spirits, and has a wide base and a snuffer cap. Follow your department’s rules on open flames and fuel storage; some labs do not allow personal lamps at all.

5. Sectioning and trimming

Saw frame

The adjustable lab saw frame has a lightweight aluminium body and a nickel-plated steel frame, takes piercing saw blades up to 63.5 mm, and tensions them with thumb screws. It comes with one blade fitted, and its listing describes it for sectioning plaster models, trimming wax-ups and cutting sprues. Blades break, especially while you are learning, so keep spares.

Plaster shears

The plaster shears are 165 mm and are described for trimming and shaping plaster, dental stone and acrylics. They are a good example of a tool many labs share but that students often prefer to own, because shared shears are rarely sharp. What else belongs in that part of the lab is covered in our plaster room guide.

6. What to leave to the department

Model trimmers, vibrators, furnaces, casting equipment, articulators and consumables are almost always supplied. Mixing bowls and spatulas usually are too. Orthodontic pliers depend on whether your course includes appliance work; if it does, the forming pliers and cutters in the orthodontic range are the next purchase.

7. Make the kit last the course

  • Label everything; lab instruments look alike and travel between benches.
  • Clean wax and stone off instruments at the end of each session, before they harden.
  • Keep carvers in a roll, case or pouch so the tips do not knock together.
  • Dry instruments thoroughly before putting them away.

UK delivery is free on orders from £30, and we aim to dispatch orders placed before 2pm UK time, Monday to Friday, the same working day. Returns are accepted within 30 days on sealed items.

Frequently asked questions

What wax carving set should a dental technology student buy?

A double-ended set with a wide range of profiles lets you try the shapes your tutors use and find what suits your hand. If your course names specific patterns, buy those.

Do dental technology students need a wax caliper?

It is one of the most used small tools on the bench. A spring wax caliper measures wax thickness with consistent pressure, which helps keep wax-ups to the right dimensions.

What blades does the lab saw frame take?

The adjustable saw frame takes piercing saw blades up to 63.5 mm long and comes with one blade fitted. Keep spares, because blades break easily while you are learning.

Do dental technicians need to register with the GDC?

Dental technicians must be registered with the General Dental Council to work. Trainee dental technicians are not registered while they train.

Related reading