Quick answer: Learn instruments in families (examination, restorative, extraction, orthodontic), then by working end, then by number. Handle a real set while you learn, say the name every time you pick something up, and give extra attention to look-alikes such as upper and lower forceps or Coupland and Cryer elevators.
The first months as a trainee dental nurse bring a flood of names: forceps by number, elevators by pattern, retainers, carriers and pliers. Dental nurses must be registered with the General Dental Council to work, and while you are training you can be employed before you qualify; much of what you learn in that time happens at the chairside, with a clinician asking for something by name. This guide is a method for learning the tray quickly and reliably. It is about recognising instruments, not about clinical technique, which your course and your practice will teach.
1. Learn in families, not alphabetically
Instruments make sense in groups, because each group shares a job and a general shape. Start with four families.
- Examination: mirror, explorer, tweezers and periodontal probe. These are on almost every tray.
- Restorative: matrix retainers, carriers, condensers, carvers and placement instruments.
- Extraction: forceps, luxators and elevators.
- Orthodontic: utility pliers, bending pliers and cutters.
Once you know which family an instrument belongs to, you have already narrowed it down to a handful of names.
2. Start with the examination set
The mirror, explorer and tweezers are the instruments you will lay out and hand over most. Having your own three-piece inspection set (a double-ended probe, angled tweezers and a mouth mirror in a pouch) is a cheap way to get familiar with them in your hand away from the chair. Notice the details: the mirror head’s size, the shape of each probe tip, the serrations on the tweezer tips. Those details are how you will tell similar instruments apart later. How the tray around them is put together is covered in our examination tray guide.
Dental students start their own kits with the same three instruments. Our guide to the dental student’s instrument kit sets out what to buy first and what can wait.
Our guide to mouth mirrors and retraction explains the three jobs a mouth mirror does, how head sizes differ, and the difference between plane and front-surface reflection.
Some trays also carry a Minnesota retractor, a single instrument that retracts the cheek and lip at one end and depresses the tongue at the other.
3. Read the working end
Handles vary between manufacturers; working ends do not. Train yourself to look first at the end that touches the tooth.
- Is it a beak (forceps), a blade (luxators and elevators), a point (explorers and probes) or a cup or nib (carriers and condensers)?
- Is it straight or angled, and in which direction?
- Is it single or double-ended? Double-ended instruments often carry a mirror-image pair, one for each side.
4. Extraction forceps: the hardest set to learn
Extraction forceps are where most trainees struggle, because there are many and they look alike at a glance. A set such as our ten-piece extraction forceps set carries figures 1, 7, 13, 17, 18, 22, 29, 51, 67 and 79, and each has its own beak profile. Three habits help.
- Upper or lower first. Look at the angle between handle and beak; the shape tells you which arch the forceps are designed for before you look at anything else.
- Then the beaks. Are they matching or different? Pointed or rounded? Narrow or broad?
- Then the number. Most forceps are stamped with their figure number; use it to confirm, not as the only way you know them.
The numbering conventions across forceps, curettes, mirrors and explorers are decoded in our guide to pattern numbers.
5. The look-alikes
Coupland and Cryer elevators
Our Coupland and Cryer elevator set is a good example of instruments that live side by side. The three Coupland elevators are straight, in 2, 3 and 4 mm widths; the two Cryers are triangular and come as a left and right pair. Learn to tell them apart by shape first, then by width or side.
Matrix retainers
A Tofflemire matrix retainer holds a thin metal band around a tooth during restorative work. It has two screws: one adjusts the size of the band loop, the other locks the band in place. Learn which is which by assembling one with a band; it is much easier with the instrument in your hand than from a picture.
Luxators and elevators
Luxators have finer, sharper blades than conventional elevators and are often colour-coded by width. Handle them carefully: the edges are sharp, and they need protecting from knocks during reprocessing.
Our guide to luxators versus conventional elevators puts the two blade shapes side by side and explains what each family is for.
The tweezers in your examination set come in more than one pattern. Our guide to college tweezers explains the angled college pattern and why fine serrations hold wet cotton where smooth jaws drop it.
6. Make it stick
- Say the name every time you pick up an instrument, including when setting up or clearing a tray.
- Photograph the tray layouts your practice uses and label the photos.
- Ask your supervising clinician which names they use; some clinicians use pattern names, others use numbers.
- Browse a collection, such as our extraction forceps and elevators collection, and test yourself on the product photos.
UK delivery is free on orders from £30, and we aim to dispatch orders placed before 2pm UK time, Monday to Friday, the same working day. Returns are accepted within 30 days on sealed items.
Frequently asked questions
What is the quickest way to learn dental instrument names?
Group instruments into families such as examination, restorative, extraction and orthodontic, then learn to read the working end, then confirm with the pattern number. Saying the name each time you handle an instrument helps it stick.
How do you tell upper and lower extraction forceps apart?
Look at the angle between the handles and the beaks first, because the overall shape tells you which arch the forceps are designed for. Then check the beaks and confirm with the figure number stamped on the instrument.
What is the difference between Coupland and Cryer elevators?
Coupland elevators are straight and come in different widths, such as 2, 3 and 4 mm. Cryer elevators are triangular and come as a left and right pair.
Do trainee dental nurses need to be registered with the GDC?
Dental nurses must be registered with the General Dental Council to work, but trainee dental nurses can be employed before they qualify. Check the GDC’s current guidance for the details that apply to you.
Related reading
- How to read dental instrument pattern numbers — the decoder for the numbers on forceps, curettes, mirrors and explorers.
- Setting up a dental examination tray — the essentials and the upgrades.